More Cabinet Carcases…

…in the galley. I added the large drawer assembly on the right, and the small under-stove one on the left. Just dry fitted for now.  Not quite a perfect assembly and paint job, but it will be covered up and the carcases should be square enough for the drawers. I did make a mistake cutting the small one on the left. The side supports don’t extend far enough forward, I wont be able to put the face frame on it. I think I can fix it by trimming out the front, or I may just re-cut it entirely.

'' -keywords='Westsail 42,,' -copyright='Copyright (c),' -subject='Building a Westsail42 From A Bare Hull'

Stove space on the left, drawer underneath. Drawers on the right.

'' -keywords='Westsail 42,,' -copyright='Copyright (c),' -subject='Building a Westsail42 From A Bare Hull'

Closeup. All have removable access panel to get at the space against the hull.

1 comment for “More Cabinet Carcases…

  1. Anonymous
    April 19, 2011 at 3:20 am

    the lucky owner of a Luger voyager 30 like your blog its giving me much help on my boat it to is a bare hull and i am the 3 owner i have done mor than the last 2 owners. nice work thanks for the tips and tricks

Leave a Reply